Berger Butterfly GP Enamel Paint for Wood, Metal

From:  Berger Paints

Product composition: Berger Butterfly GP Enamel is a long lasting, glossy, solvent-based paint for interior surface only.   It can be applied on wooden surfaces like interior doors, windows, interior ply board partition, walls, furniture and cabinets and on mild steel metal surfaces like grills, steel furniture, collapsible gates, shutters etc. 

USP: Full gloss, value for money, economic interior solvent-based paint. 

Safety features: Flammable 

Directions for use:

Surface preparation: Initially sand the surface with coarse sand/water paper according to the type of surfaces to remove rust, dust and other loose, unwanted particles.   Wipe the surface clean.   Apply 1 coat primer after proper thinning and allow the paint to dry fully.   Sand the surface again with less coarser Sand/Water Paper lightly and wipe clean.   Apply 2 coats appropriate primer giving overnight drying interval between the coats.   Sand it again with Water Paper No. 220/280. 

For wooden and metal surface apply 1 coat of Luxol Speed Coat Primer surfacer with proper dilution, and for wall surface apply 1 coat of solvent-base cement primer with ideal dilution.   Allow it to dry fully. Sand the painted surface with Water Paper No. 380/400 lightly to make the surface smooth and undulation free.   Before application of top coat, dilute the paint as mention above and strain it through clean cloth.   Ensure that the painting brush and mixing container are absolutely clean. 

Apply Butterfly GP Enamel  2 to 3 coats to get rich, full gloss finish giving an overnight interval between the coats.   Ensure surface pH value is within 7 - 11. 

Butterfly GP Enamel should not be used on damp surfaces or substrates subjected to continuous seepage. 

Full gloss, value for money, economic interior solvent based paint

View Delivery Areas

Delivery Areas

Pan India

Close

PriceRequest a Callback

Enter your mobile number

**Enter valid number!

**Message successfully sent