Tartaruga Hi Build Durable, Weatherproof Paint - Berger WeatherCoart Hi-Build

From:  Berger Paints

Confirms to ISI/IGBC & GRIHA Specifications

Weather Coat Hi-Build:

Natural Stone finishes, Silicone enhanced for water repellence and highly resistant to mechanical damage, Available in granite, stone and mosaic variants.

Product composition:  WeatherCoat Hi-Build is an European concept.   Uniqueness in its textures has made It achieve exceptional results.   The texture coating provides a decorative and protective plaster coat for the interiors and exteriors of the building.   Imparts a stunning decorative effect to get a single or multi-coloured combinations.  In India, this decorative segment is climbing the ladder of success. 

Silicone enhanced for water repellence and highly resistant to mechanical damage. Available in Granite, Stone and Mosaic variants 

The product consists of 2 components 

Specially formulated medium  Natural aggregates of different colours 

Directions for use:

Surface preparation: The surface should be sound, clean, free of loose particles, dust, grease, chalk, fungus and mould.   Remove fungus growth with Berger Bio-Wash, anti-fungal treatment or with a fungicide bleaching powder solution (2-5%).   Clean surface by wire-brushing and wash with water.   Cavities (up to 5 mm deep) in the substrate should be filled with Home Shield Crack Fill powder/paste and the substrate should be made uniform before the application of WeatherCoat Hi-Build. 

Primers: The substrate should be primed ""ith WeatherCoat Exterior Primer WT. 

Product preparation:

Pour Part A into the container. Slowly add Part B into Part A. Mix contents thoroughly to a uniform consistency with a mechanical stirrer.

Method of application:

Mosaic finish:  Apply the prepared mixture by evenly spreading it on the substrate using a stainless steel trowel.   Remove excess material to obtain aggregate size layer thickness and even surface with a short stainless steel float. Next, even out the plaster to a uniform thickness by running a flat stainless float in a single direction - top to bottom/left to right. 

Stone and granite finish: Spray 1 or 2 layers of the prepared mixture/plaster using a spray gun (2-5 mm nozzle) at a constant pressure of 0.50 MPA. Care must be taken to spray the plaster diagonally to the wall from a distance of 30-40 cm in an even, continuous operation. 

Top coat: Apply 2 coats of WeatherCoat Acrylic Clear to increase longevity and avoid dust deposition. 

Berger WeatherCoart Hi-Build is part of Berger Paints 10 year life Exterior Painting System and Premium Acrylic Based Texture, EXTERIOR Texture  System.

View Delivery Areas

Delivery Areas

Pan India

Close

PriceRequest a Callback

Enter your mobile number

**Enter valid number!

**Message successfully sent