Berger Tile Adhesive Plus

From:  Berger Paints

High performance tile fixing adhesivefor external flooring, internal wall/flooring and tile-on-tile applications

Tile Adhesive Plus:
Better bond than conventional cement based mortar, High performance adhesive for internal and external flooring/wall and tile-on-tile application.

Product composition:
Tile Adhesive Plus is a ready mixed polymer modified cement based powder which is multi-purpose tile adhesive. It provides outstanding bonding of tiles with cementitious surfaces like plaster, concrete etc. Tile Adhesive Plus is non-shrinking, self curing and has brilliant binder properties.

Usage area:
For fixing all types of tiles such as external flooring, internal flooring/walls, tile on tile and swimming pool tiling applications.

The surface to be tiled should be clean and sound I Old surfaces must be free from any kind of laitance, grease, oils, wax, polish etc. I Pour one 20 Kg bag in approx. 6.5 ltr of clean water (recommended proportion approx. 3: 1 of Tile Adhesive Plus: Water) I At site, addition of water should be adjusted to attain desired consistency I Do not put water into the powder I Mix with a slow speed drill (50-100 rpm) or with a trowel until a lump-free homogeneous paste is obtained I Always mix the required quantity, which can be consumed within the specified pot life maintaining the aforementioned mixing proportion I Spread the mixed adhesive to a thickness of approx 3 - 6 mm and comb with a notched trowel I Apply the adhesive paste which can be tiled within 25 -30 minutes I Intermittently touch the adhesive paste on substrate by finger I If the adhesive sticks to fingers then continue tiling and if not, scrape off the mix and apply new coat before further tiling I Start placing tiles on the surface to be tiled I Tap the tiles properly to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids I Keep joints between two tiles using spacers that are available with Tile Adhesive Plus bag I Allow tiling to set for 24 hours prior to filling joints I Use mechanical clamps for holding the heavy stones in positions on vertical surface Before applying tiles on tiles, make sure that the original tiling surface has been scraped off to provide a sufficient mechanical key for bonding.

View Delivery Areas

Delivery Areas

Pan India

Close

PriceRequest a Callback

Enter your mobile number

**Enter valid number!

**Message successfully sent